HDPE의 결함 및 개선 방안

The HDPE molecular chain is linear in structure, lacks long chain entanglement, and has weak intermolecular forces. It is prone to stress cracking under long-term static loads or environmental medium erosion.

When subjected to tensile stress (such as container internal pressure, assembly stress), or in contact with surfactants, grease and other media, the molecular chain is easy to slip and cause cracks to expand.

For example, HDPE chemical storage tanks containing solvents may crack within a few months even if the stress is lower than the yield strength, which is why anti-stress agents need to be added to food packaging.

Insufficient rigidity: performance gap with polypropylene (PP)
Compared with the semi-crystalline structure of PP, although HDPE has a higher degree of crystallinity (about 60%-80%), the regularity of the molecular chain is slightly inferior, and lacks the steric hindrance effect brought by the methyl side chain in PP, resulting in its elastic modulus (about 400-1000MPa) being significantly lower than PP (about 1000-1500MPa).

Taking injection molded pallets as an example, the load-bearing capacity of HDPE pallets of the same thickness is 20%-30% lower than that of PP pallets, which limits its application in high-rigidity structural parts (such as car bumpers). However, by filling reinforcing fillers such as talcum powder and glass fiber, the stiffness of some HDPE modified materials can be increased to a level close to that of PP.

High mold shrinkage: Difficult to control molding precision

The linear thermal expansion coefficient (about 110-130×10⁻⁶/℃) and crystallinity-related shrinkage (1.5%-3.0%) of HDPE are significantly higher than many engineering plastics (such as ABS, whose shrinkage is only 0.4%-0.7%). This makes precision injection molded parts (such as electronic component housings) prone to dimensional deviations.

For example, a 100mm diameter HDPE flange may have a radial error of 0.5-1mm due to shrinkage after demolding. In order to solve this problem, industrial production usually takes measures such as extending the holding time and optimizing the mold temperature field (for example, controlling the mold temperature at 40-60℃), but it is still difficult to completely avoid post-shrinkage, especially for complex parts formed by multi-cavity molds.

Weathering and heat resistance defects: environmental adaptability bottleneck

UV aging risk: The hydrocarbon structure in the HDPE molecular chain lacks the ability to absorb ultraviolet rays (especially the 290-400nm band). Long-term exposure to sunlight will cause free radical chain degradation, which manifests as surface powdering and decreased mechanical properties.

Data show that the tensile strength of HDPE film without antioxidants may decay by more than 50% after 6 months of outdoor exposure. This is also the reason why agricultural greenhouse films need to add ultraviolet absorbers (such as benzophenones).

Thermal stability limitations: The melting point of HDPE is about 125-135℃, which is higher than LDPE (105-115℃), but lower than PP (160-165℃). The long-term use temperature usually does not exceed 80℃. When the temperature exceeds 90°C, its crystalline region will gradually soften, resulting in a decrease in creep performance.

For example, when HDPE water pipes transport hot water above 60°C, their compressive strength will be 30% lower than that at room temperature, which makes it impossible to apply to high-temperature fluid transportation scenarios.

Processing technology limitations: application barriers to connection technology

HDPE's non-polar surface and high melt viscosity make it difficult to achieve reliable connections through high-frequency welding. High-frequency welding relies on the material to generate dielectric loss heat in an alternating electric field, but HDPE's dielectric constant (2.3-2.4) and dielectric loss tangent (

This defect makes large HDPE components (such as tanks and pipes) rely more on hot melt butt welding or electric fusion welding, which not only increases the complexity of the process, but also limits the possibility of rapid on-site assembly.

Performance upgrade: from defect improvement to functional breakthrough

1. Anti-stress cracking modification: molecular design and additive synergy
By introducing a small amount of α-olefins (such as 1-butene, 1-hexene) for copolymerization, short branches can be introduced into the high-density polyethylene (HDPE) molecular chain, thereby increasing the density of intermolecular entanglement.

For example, Borstar® HDPE of Borealis Chemicals uses bimodal molecular weight distribution technology to increase the stress cracking index (SCG) from 100h of traditional HDPE to more than 5000h, which is suitable for high-pressure gas pipelines. In addition, adding 0.5%-1% polyethylene wax or calcium stearate as an internal lubricant can reduce the friction between molecular chains and delay crack propagation. This modified material has been widely used in detergent packaging bottles.

2. Enhanced heat and weather resistance: Nanocomposites and coating technology
Nanofiller modification: 0.5%-2% montmorillonite or graphene is evenly dispersed in high-density polyethylene (HDPE) to form a sheet barrier structure, which can increase the heat deformation temperature by 10-15°C and improve the UV shielding effect by 40%.

For example, the high-density polyethylene/montmorillonite nanocomposite prepared by Dow Chemical Insite™ technology can be used for a long time at temperatures up to 95°C and is suitable for hot water pipes.

Surface coating treatment: By plasma treatment, polar groups containing hydroxyl and carboxyl groups are grafted on the surface of high-density polyethylene, or a 0.1-0.5μm thick UV-curable acrylate coating is applied, which can extend the weathering life to more than 5 years.

This technology has been applied to outdoor high-density polyethylene trash cans. After 1000 hours of xenon lamp aging test, the color difference ΔE8).

3. Welding process innovation: compatibilizer and interface engineering
Develop high-frequency welding compatibilizers for PE (such as maleic anhydride grafted HDPE, MAH-g-HDPE), and form a polar transition layer at the welding interface through melt blending, which can make the weld strength reach more than 80% of the body strength.

For example, the HotAir welding equipment of Leister Company in Germany, combined with MAH-g-HDPE welding rods, can achieve high-strength connection of HDPE sheets, and the weld tensile strength is ≥25MPa.

In addition, by coating the silicon carbide absorption layer on the surface of HDPE and using 1064nm laser to induce local melting, laser welding technology has been successfully applied to the sealing connection of medical catheters, and the leakage rate can be controlled below 10⁻⁹Pa・m³/s.

Breaking through application boundaries and helping industry practice
In the field of water supply and drainage, traditional HDPE pipes need to add 2% carbon black as a light shielding agent due to insufficient weather resistance, which limits the application of transparent pipe fittings. ClearShield™ HDPE launched by Dow achieves a 20-year carbon black-free outdoor service life through a special antioxidant system design, and has been used in transparent pipes for landscape pools.

In the field of electronic packaging, in response to the problem of HDPE being difficult to bond, Asahi Kasei has developed a surface hydroxylated HDPE film. After corona treatment, the peel strength with aluminum foil can reach 3N/15mm, meeting the needs of food vacuum packaging.

Our platform connects hundreds of verified Chinese chemical suppliers with buyers worldwide, promoting transparent transactions, better business opportunities, and high-value partnerships. Whether you are looking for bulk commodities, specialty chemicals, or customized procurement services, TDD-Global is trustworthy to be your fist choice.