수분 분산성 실리콘 소포제 DF-601
제품 설명
DF-601 소포제는 물에 분산 가능한 실리콘 소포제입니다. 이 제품은 폴리에테르 변성 실리콘을 주요 원료로 하여 제작된 소포제 제품으로, 금속 가공 유체 농축액을 위해 특별히 개발되었습니다.
DF-601 소포제는 주로 금속 가공 액체 시스템에 사용됩니다.
DF-601 소포제는 금속 가공 유체 농축액에 직접 첨가한 후, 완전한 분산과 균일성을 보장하기 위해 약간 저어주면 됩니다.
금속 가공 유체에 첨가할 권장량: 0.1-0.5%.
DF-601 소포제는 순중량 25kg의 25리터 플라스틱 드럼 또는 순중량 200kg의 200리터 플라스틱 드럼으로 배송됩니다.
*우수한 소포 및 방포 성능.
제품 품질을 보장하기 위해 사용하지 않을 때는 용기를 단단히 밀봉해야 합니다. 일반적인 실온에서 보관하며, 극도로 뜨겁거나 차가운 환경에 장기간 노출되지 않도록 해야 합니다. 이는 제품 층 분리를 유발할 수 있습니다. 제품이 층 분리된 경우 사용 전에 저어주십시오. 제품이 얼었을 경우, 가열하여 해동한 후 저어 사용해야 합니다.
*포뮬러 내 호환성과 안정성이 우수하며, 물에 대한 분산성이 좋습니다.
*소량으로도 충분하며, 발포 시스템의 기본 특성에 영향을 미치지 않습니다.
제품의 유효 기간은 6개월입니다.
| Company Name | Holly (Weihai) New Materials Limited | 국가 | China |
| 비즈니스 유형 | Manufacturer/Factory | Company Size | 56 |
| 설립 일자 | February 10, 2006 | ||
| 주소 | No. 2 Nanjing Road, Caomiaozi Town, Lingang Economic and Technological Development Zone, Weihai City, Shandong Province，China. | ||
| 주요 제품 | Tri carboxylic acid low chlorine rust inhibitor, lubricant, bactericide, defoamer, phosphate aluminum alloy corrosion inhibitor, ricinoleic acid | ||
Shanghai Milin Chemical Co., Ltd. was registered and established in Shanghai, China in early 2006. In 2010, Shanghai Haolin Chemical Co., Ltd. was founded in Jinshan, Shanghai, and in 2022, Haolin (Weihai) New Materials Co., Ltd. was established in Shandong. Since its establishment, Milin and Haolin Chemical have been dedicated to the research and production of cutting fluid additives for over a decade. We focus on independent research and production rather than acting as agents for foreign brands; we emphasize core competitiveness rather than expanding our product range by stocking market goods. We advocate for quality over quantity. Milin Chemical is labeled as a domestic manufacturer of cutting fluid additives rather than a trader. Compared to our competitors, our product range is less than one-tenth of theirs. However, our quality and prices are highly competitive. Milin is a genuine additive manufacturer.
At the beginning of its establishment, Milin Chemical was the first in China to independently develop and produce biocide BK and biocide MBM, which remain the brands of mainstream cutting fluid manufacturers in the country. In 2010, Milin Chemical achieved independent production of ternary carboxylic acid rust inhibitors, with key performance close to advanced international levels. In 2014, Milin Chemical developed an aluminum corrosion inhibitor with performance comparable to mainstream foreign products, with an additive dosage as low as 0.4%.
Milin Chemical has many years of experience in the development, research, and on-site application of metalworking fluids and additives, offering unique insights into additive recommendations and production technology based on application formulas. Our products include: lubricants, biocides, rust inhibitors, defoamers, phosphate ester aluminum alloy corrosion inhibitors, and other single agents.
Currently, Milin Chemical has become a long-term partner of major domestic metalworking fluid manufacturers, witnessing the development of China's independent metalworking fluid brands!
```견적 요청 발송
